and Applied Mechanics
56, 3, pp. 645-656, Warsaw 2018
DOI: 10.15632/jtam-pl.56.3.645
TIG and laser beam welded joints – simplified numerical analyses
to thermo-physical perturbation. The paper presents analyses of many different issues
involved in welding and potential solutions including adoption of simplifying assumptions,
application of numerical algorithms and development of reliable representative models. The
Finite Element Method is used to determine residual stress distribution, using results from
thermo-physical tests and widely known mechanical properties of metals subjected to welding
processes. Experimental and numerical methods for determining residual stress are
compared for welds generated using both TIG (Tungsten Inert Gas, Gas Tungsten Arc Welding)
and a laser beam. This data reveals that it is necessary to precisely define location of
the analyzed welded fragment to correctly determine thermal boundary conditions.
References
Benasciutti D., Lanzutti A., Rupil G., Haeberle E., 2014, Microstructural and mechanical
characterisation of laser-welded lap joints with linear and circular beads in thin low carbon steel
sheets, Materials and Design, 62, 205-216
Blacha Ł., Karolczuk A., 2016, Validation of the weakest link approach and the proposed
Weibull based probability distribution of failure for fatigue design of steel welded joints, Engineering
Failure Analysis, 67, 1, 46-62
Bogdanowicz Z., Nasiłowska B., Jóźwiak P., Zasada D., 2015, Structure and mechanical
properties of 1.4539 austenitic steel joints made by TIG and laser-beam welding, Solid State
Phenomena, 224, 99-104
Dong D., Liu Y., Yang Y., Li J., Ma M., Jiang T., 2014, Microstructure and dynamic tensile
behavior of DP600 dual phase steel joint by laser welding, Materials Science and Engineering, 594, 17-25
Dyląg Z., Jakubowicz A., Orłoś Z., 2007, Strength of Materials (in Polish), vol I, WNT
Warszawa
Jiao X., Yang Y., Zhou C., 2014, Seam tracking technology for hyperbaric underwater welding,
Chinese Journal of Mechanical Engineering, 22, 2, 265-269
Kluger K., Łagoda T., 2016, Fatigue life estimation for selected materials in multiaxial stress
states with mean stress, Journal of Theoretical and Applied Mechanics, 54, 2, 385-396
Lee C.-H., Chang K.-H., 2014, Comparative study on girth weld-induced residual stress between
austenitic and duplex stainless steel pipe welds, Applied Thermal Engineering, 63, 140-150
Ma J., Kong F., Liu W., Carlson B., Kovacevic R., 2014, Study on the strength and
failure modes of laser welded galvanized DP980 steel lap joints, Journal of Materials Processing
Technology, 214, 8, 1696-1709
Marc○R 2011, Volume A: Theory and User Information, Copyright 2011MSC. Software Corporation
Murakawa H., 2013, Residual stress and distortion in laser welding, Handbook of Laser Welding
Technologies, 374-398
Nasiłowska B., 2016, Fatigue life and fractures in 1.4539 austenitic steel welded joints prepared
using TIG and laser beam welding methods, PhD Thesis, Military University of Technology,
Warsaw, 43-47
Ogle M.H., Maddox S.J., 1998, Joints in aluminium, Seventh International Conference Joints
in Aluminium – INALCO’98, Cambridge, UK
Piekarska W., 2007, Numerical Analysis of Thermomechanical Phenomena in the Laser Beam
Welding – the Tempaerature Field, Phase Transformations and Stresses (in Polish), Czestochowa
University of Technology, Częstochowa
Piekarska W., Kubiak M., 2011, Three-dimensional model for numerical analysis of thermal
phenomena in laser – arc hybrid welding process, International Journal of Heat and Mass Transfer, 54, 23-24, 4966-4974
Piekarska W, Kubiak M., 2013, Modeling of thermal phenomena in single laser beam and laser
– arc hybrid welding processes using projection method, Applied Mathematical Modelling, 37, 415, 2051-2062
PN-EN 10088 – 1:2014 – 12 – Stainless steels, Part 1: List of stainless steels
Ranatowski E., 2009, Calculational Mechanics of Welding – Physical Fundamentals of the Process
(in Polish), University Publications, University of Technology and Life Sciences in Bydgoszcz
Susmel L., Tovo R., 2008, Molified W¨ohler curie method and Eurocode 3: accuracy in predicting
the multixial fatigue strength of welded joint, [In:] Lifetime Estimation of Welded Joints, T. Łagoda
(Edit.), 203-207
Tan W., Shin Y.C., 2015, Multi-scale modeling of solidification and microstructure development
in laser keyhole welding process for austenitic stainless steel, Computational Materials Science, 98, 15, 446-458
Voss O., 2011, Untersuchung relevanter Einflussgr¨ossen auf die numerische Schweisssimulation,
TU Braunschweig, Shaker Verlag, Aachen, 36
Zamiri Akhlaghi F., 2009, Fatigue Life Assessment of Welded Bridge Details Using Structural
Hot Spot Stress Method. A Numerical and Experimental Case Study, Master Thesis, Chalmers
University of Technology, G¨oteborg, Sweden