and Applied Mechanics
56, 3, pp. 857-871, Warsaw 2018
DOI: 10.15632/jtam-pl.56.3.857
Investigations of material behaviour under monotonic tension using a Digital Image Correlation system
having U, V shapes. Their variants with respect to dimensions are illustrated in static
and fatigue tests. The influence of these types of geometrical imperfections on material
fatigue is presented using variations of the W¨ohler curve, number of cycles to failure and
the fatigue notch factor. Results of experiments conducted by the use of the Digital Image
Correlation system called 4M Aramis are illustrated. Courses of tensile characteristics of the
41Cr4 steel, obtained by means of both techniques: extensometer and DIC are compared.
They indicated that the DIC technique can be a good tool for determination of mechanical
properties. The equivalent strain full-field distributions on specimens tensioned with and
without imperfections up to material fracture are presented. The influence of U and V
notches on variations of tensile curves is shown.
References
Andersson M., 2013, The influence of notches on fatigue of heat treated sintered steel, EURO
PM 2013, Gothenburg, 6 p.
Bennett J.A.,Weinberg J.G., 1954, Fatigue notch sensitivity of some aluminium alloys, Journal
of Research of the National Bureau of Standards, 52, 5, 235-245
Boroński D., 2007, Methods for Examination of Strain and Stress under Fatigue of Material
and Structures (in Polish), Institute for Sustainable Technologies, National Research Institute,
Bydgoszcz-Radom, Poland, 190 p.
Chu T.C., Ranson W.F., Sutton M.A, Peters W.H., 1985, Application of digital-image-
-correlation techniques to experimental mechanics, Experimental Mechanics, 25, 3, 232-244
Chen C., 2004, General theory, ME631, UAF, 15 p.
da Silva B.L., Ferreira J.L.A., Arajo J.A., 2012, Influence of notch geometry on the estimation
of the stress intensity factor threshold by considering the Theory of Critical Distances,
International Journal of Fatigue, 42, 258-270
DuQuensay D.L., Topper T.H., Yu M.T., 1986, The effect of notch radius on the fatigue notch
factor and the propagation of short cracks, [In:] The Behaviour of Short Fatigue Cracks, Edited
by K.J. Miller and E.R. de los Rios, EGF Pub., Mechanical Engineering Publications, London, 323-335
Durif E., Réthoré J., Combescure A., Fregonese M., Chaudet P., 2012, Controlling
stress intensity factors during a fatigue crack propagation using digital image correlation and a
load shedding procedure, Experimental Mechanics, 52, 8, 1021-1031
Fatemi A., Fang D., Zeng Z., 2002, Notched fatigue behaviour under axial and torsion loads:
experiment and predictions, 8th International Fatigue Congress, Stockholm, Sweden, 3, 1905-1914
Fatemi A., Zeng Z., Plaseied A., 2004, Fatigue behaviour and life predictions on notched
specimens made of QT and forged microalloyed steels, International Journal of Fatigue, 26, 6, 663-672
Filippini M., 2000, Stress gradient calculations at notches, International Journal of Fatigue, 22, 5, 397-409
Forster J., Theobald A., Engel S., Pasmann R., 2012, Using optical measuring system for
identification of material parameters for Finite Element Analysis, 11. LS-DYNA, Ulm, Germany, 9 p.
Gower M.R., Shaw R.M., 2010, Towards a planar cruciform specimen for biaxial characterization
of polymer matrix composites, Applied Mechanics and Materials, 24-25, 115-120
Kamaya M., Kawakubo M., 2011, A procedure for determining the true stress-strain curve over
a large range of strains using digital image correlation and finite element analysis, Mechanics of
Materials, 43, 5, 243–253
Lanning D.B., Haritos G.K., Nicholas T., 1999, Influence of stress state on high cycle fatigue
of notched Ti-6Al-4V specimens, International Journal of Fatigue, 21, 1, S87-S95
Lord J.D., 2009, Digital Image Correlation (DIC), Modern stress and strain analysis, [In:] A
State of the Art Guide to Measurement Techniques, BSSM Technical Editors: J. Eaton Evans, J.M.
Dulie-Barton, R.L. Burguete, 14-15
Maruno Y., Miyahara H., Noguchi H. and Ogi K., 2004, Notch size effects in the fatigue
characteristics of Al-Si-Cu-Mg cast alloy, Materials Transactions, 45, 3, 839-843
Mazdumar P.K., Lawrence F.V. Jr., 1981, An analytical study of the fatigue notch size effect,
A Report of the Fracture Control Program, College of Engineering, University of Illinois, Urbana,
Illinois 6180
Milke J.G., Beuth J.L., Biry N.E., 2000, Notch strengthening in titanium alumini dies under
monotonic loading, Experimental Mechanics, 4, 4, 415-424
Neuber H., 1958, Kerbspannungslehre, 2nd ed., Berlin, Springer-Verlag
Neuber H., 1961, Theory of Notch Stresses, Office of Technical Services, U.S. Department of
Commerce, Washington, DC
Olszak W., 1965, Theory of Plasticity, PWN, Warsaw
Peterson R.E., 1959, Analytical approach to stress concentration effect in fatigue of aircraft materials,
Proceedings on Fatigue of Aircraft Structure, WADC Technical Report No. 59-507, August 1959, 273-299
Pilkey W.D., 1997, Peterson’s Stress Concentration Factors, Wiley, New York
Pluvingae G., Gjonaj M., 2001, Notch Effects in Fatigue and Fracture, NATO Science Series,
Series II: Mathematics, Physics and Chemistry, 11, Springer Science+Business Media, B.V.
Qian G., Hong Y., Zhou Ch., 2010, Investigation of high cycle and very-high-cycle fatigue
behaviors for a structural steel with smooth and notched specimens, Engineering Failure Analysis, 17, 7-8, 1517-1525
Siebel E., Stieler M., 1955, Ungleichformige spannungsverteilung bei schwingender beanspruchung,
Zeitschrift des Vereines Deutscher Ingenieure, VDI-Z, 97, 5, 121-126
Topper T.H., Wetzel R.M., Morrow J., 1967, Nuber’s rule applied to fatigue of notched
specimens, Report No. NAEC-ASL-1114, Aeronautical Structures Laboratory, 15 p.
Toussaint F., Tabourot l., Vacher P., 2008, Experimental study with a Digital Image Correlation
(DIC) method and numerical simulation of an anisotropic elastic-plastic commercially pure
titanium, Archives of Civil and Mechanical Engineering, 8, 3, 131-143
Wahl A.M., Beuwkes R., Pittsburgh E., 1930, Stress concentration produced by holes and
notches, Applied Mechanics, 56, 11, 617-623
Westergaard H.M., 1952, Theory of Elasticity and Plasticity, New York, John Wiley
Whaley R.E., 1964, Fatigue and static strength of notched and un-notched aluminium alloy and
steel specimens, Experimental Mechanics, 329-334
www.gom.com